Profiling

Profiling – or cold milling – is the basis for new road profiles. Layer by layer removal of damaged road surfaces allows for the separation of materials for re-use or disposal.

Cold milling is an especially quick and economical construction method where removal of existing material is required. Construction costs and working time can be reduced which has a positive effect on traffic flow, and materials can be loaded directly onto trucks for removal, saving additional resources on site.

Robinson Civil Group offers profiling works Queensland-wide for the private, local and state government sectors.

Robinson Civil Group utilises industry leading methodology, where the existing base course of suitable existing pavements is milled out and stored on site for use as cement modified subgrade replacement. For more information on the process, refer to our stabilization information.

All machines come with fully trained, experienced and competent operators backed up by field service fitters and workshop personnel.

OUR FLEET

Wirtgen W100F Profiler01
• Cutting width of 1000mm
• Cutting depth of 320mm
• Rear mounted cutting drum
• Highest horsepower engine in its class ensuring maximum productivity
• Efficient milling machine control and levelling to minimise operating costs
• Compact size makes transporting easy
• Ideal machine for small or hard to access sites
• Suitable for mill and fill operations, and milling narrow shoulder widenings

Wirtgen W150 Profiler
• Cutting width of 1500mm
• Cutting depth of 320mm
• Offset mid mounted cutting drum
• The 'smallest' large milling machine that achieves maximum productivity and efficiencies
• One person operation02
• High horsepower yet fuel efficient engine
• Intelligent machine control and compact dimensions for transport
• Ideal for wholesale stripping of material, shoulder widenings, and mill and fill operations.

Wirtgen W200 Profiler
• Cutting width of 2000mm
• Cutting depth of 330mm
• Mid mounted cutting drum• 3 selectable cutting speeds for optimum adaptation to the milling application
• Maximum stability and greatly simplified levelling
• Vacuum cutting system for a dustless operation and maximum environment protection
• Single engine concept enables demand based output and lower fuel consumption
• Ideal for wholesale stripping of pavement layers, and large mill and fill operations

Wirtgen W210 Profiler03
• Cutting width of 2000mm
• Cutting depth of 330mm
• Mid mounted cutting drum
• 3 selectable cutting speeds for optimum adaptation to the milling application
• Maximum stability and greatly simplified levelling
• Vacuum cutting system for a dustless operation and maximum environment protection
• Dual engine concept enables demand based output and lower fuel consumption
• Ideal for wholesale stripping of pavement layers, and large mill and fill operations

Profiling – or cold milling – is the basis for new road profiles.  Layer by layer removal of damaged road surfaces allows for the separation of materials for re-use or disposal.

Cold milling is an especially quick and economical construction method where removal of existing material is required.  Construction costs and working time can be reduced which has a positive effect on traffic flow, and materials can be loaded directly onto trucks for removal, saving additional resources on site.

Robinson Civil Group offers profiling works Queensland-wide for the private, local and state government sectors.

Robinson Civil Group utilises industry leading methodology, where the existing base course of suitable existing pavements is milled out and stored on site for use as cement modified subgrade replacement.  For more information on the process, refer to our stabilization information.

All machines come with fully trained, experienced and competent operators backed up by field service fitters and workshop personnel.

OUR FLEET

Wirtgen W100F Profiler

·         Cutting width of 1000mm

·         Cutting depth of 320mm

·         Rear mounted cutting drum

·         Highest horsepower engine in its class ensuring maximum productivity

·         Efficient milling machine control and levelling to minimise operating costs

·         Compact size makes transporting easy

·         Ideal machine for small or hard to access sites

·         Suitable for mill and fill operations, and milling narrow shoulder widenings

Wirtgen W150 Profiler

·         Cutting width of 1500mm

·         Cutting depth of 320mm

·         Offset mid mounted cutting drum

·         The ‘smallest’ large milling machine that achieves maximum productivity and efficiencies

·         One person operation

·         High horsepower yet fuel efficient engine

·         Intelligent machine control and compact dimensions for transport

·         Ideal for wholesale stripping of material, shoulder widenings, and mill and fill operations.

Wirtgen W210 Profiler

·         Cutting width of 2000mm

·         Cutting depth of 330mm

·         Mid mounted cutting drum

·         3 selectable cutting speeds for optimum adaptation to the milling application

·         Maximum stability and greatly simplified levelling

·         Vacuum cutting system for a dustless operation and maximum environment protection

·         Dual engine concept enables demand based output and lower fuel consumption

·         Ideal for wholesale stripping of pavement layers, and large mill and fill operations